EPS Cement Insulation Block Machine Lightweight Concrete Wall Panel Making Machine

Lightweight Gypsum Wall Panel/ Wall Board Making MachineLight Weight Wall Board Machine EPS Cement Wall Board Making Machine With 50000m2 to 500000m2/year OutputWhat is Light Weight Wall Board/EPS Cement Wall Board:EPS sandwich cement wall board is a new type of high-grade light wall panel material with EPS mortar as core m

Featured Products

Lightweight Gypsum Wall Panel/ Wall Board Making Machine
Light Weight Wall Board Machine EPS Cement Wall Board Making Machine With 50000m2 to 500000m2/year Output


EPS Cement Insulated Block Machine Lightweight Concrete Wall Panel Making Machine
What is Light Weight Wall Board/EPS Cement Wall Board:
EPS sandwich cement wall board is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives, and the panel formed by the EPS wall board making machine.
 
Product size: length 2440mm, width 610mm, thickness 60-180mm (size and thickness can be adjusted). The two surfaces of the new type composite sandwich board are composed of high strength water resistant calcium silicate board with good waterproof properties; good thermal insulation EPS bonding mortar as Core material; The product is of structural function , waterproof and thermal insulation performance, mainly used as building wall partition.
 
This kind of EPS Sandwich Wall Board is provided with comprehensive advantage that other wall panel can't compare with: solid, lightweight, thin body, high strength, impact resistance, strong hanging force, heat insulation, sound insulation, fire prevention, waterproof, easy cutting, can be arbitrary slot, without rendering coat, dry decoration, environmental protection. Achieving the purpose of saving energy, improving energy efficiency, Put the construction industry from traditional wet type construction to advanced dry type construction, thus realizing residential parts production industrialization, modernization of technical equipment, intensive production and legal application promotion, construction and equipment integration.

At the same time also can reduce wall occupying space, increase the rate of using residential space, reduce structure load, promote building aseismic ability and safety performance, reduce the comprehensive cost. This product can be widely used in all kinds of high, multi-story building as nonbearing wall, also can be sound insulation, fire partition wall. This product's application is a new breakthrough of the world's wall materials reform, this wall panel have tested by the relevant institutions and its strength, sound insulation, fire resistant, radioactive, water resistance and other performance indexes all reach or over the relevant national standards.

 EPS Wall Panel Making Production Line Machine


EPS Cement Insulated Block Machine Lightweight Concrete Wall Panel Making Machine

 

1.Main Feasture:

(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production. 

 

(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.

 

(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.

 

(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the

 

closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled

 

wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the

 

bad temperature control.

 

(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.

 

(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and

 

material conveying to silos.

 

(7)Most components are of world-famous brands, with reliable performance, stable quality, long service

 

 life and low maintenance cost.

 

(8)The machine can realize the primary and second expansion

EPS Cement Insulated Block Machine Lightweight Concrete Wall Panel Making Machine

Product Description

 Introduction of Hongfa EPS light weight wall panel production line

1. Materials of Hongfa Brand EPS Wall Panel

 Core Material: EPS( Foam polystyrene, Cement and fly ash.)

Board materials: Calcium Silicate Board.

2. Common Specifications of EPS cement wall sandwich panel

L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.

2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.
 

3. Applied range of light weight EPS wall panel

For interior and exterior wall partition on steel or concrete structure building, new construction or renovations. It can be widely applied to wall materials of various high and low buildings such as bank, office building, hospital, school, hotel, shopping mall, amusement, old house reconstruction, residence and workshop.

4. Advantages of Hongfa wall sandwich panel

A:Light weight
B:Excellent sound insulation
C:Heat Insulation

D:Waterproof Fire proof
E:Energy Efficient Environmental

F:Convenient construction
G:High Intensity without deformation.

Raw Materials Proportion:

CementSandMineral admixturesWaterAddictiveEps (M3)
11.0 - 2.00.5 - 1.20.55 - 0.650.04 - 0.060.5 - 0.85m3
weight ratioVolume per M3



Reference Workers needed:
(take capacity 200,000/yearly as example)
Raw materials, boiler and EPS expending:1
Mixing:1
Pouring:1
Pre insert silica panel:1
Demoulding:1
Total:                 
EPS Cement Insulated Block Machine Lightweight Concrete Wall Panel Making Machine

 
How is the EPS Light weight wall board produced?
EPS Cement Insulated Block Machine Lightweight Concrete Wall Panel Making Machine
EPS Cement Insulated Block Machine Lightweight Concrete Wall Panel Making Machine


Take an EPS Wall Board production line with annual capacity 200,000mfor example (700 m2 / day):
 2016 Hot Investment Project Light Weight EPS Wall Composition board Making Machine

Product Description
 (1). What is the main materials of the EPS Wall Panel Machine used to make the light weight sandwich wall board?
Main raw materials of EPS wall panel are: fly ash, slag, ceramic, portland cement and EPS foam particles, the production process is simple and low cost.
(2). The Concrete wall panel is suitable for modern building standard.
The overall world development trend of brick from clay to non-clay, from solid to hollow, from the small to large, from heavy to lightweight, from low intensity to high-strength, from high to low energy consumption. And the project is stressed to wall lightweight, high strength, thermal insulation, waste utilization, energy conservation and other functions.Therefore, the implementation of the project is imperative. The panel can meet the requirements of the modern building standard.
(3). Rich and Extensive Sources of Raw Materials for making EPS wall board.
The  production of wall materials must be rich and extensive sources of raw materials. The main raw materials of wall panel are industrial residues,fly ash, slag and EPS foam particles,which not only is recyclable and reducing pollution,but also uses inexpensive ordinary chemical raw materials.The above two kinds of sources of raw materials are abundant and extensive.
(4). Obvious Advantages of Industry Competition
EPS new green wall panel has five features:
(A) Lightweight: The raw materials used are Lightweight aggregates, fly ash,etc, non-reinforced concrete, gravel and other heavy feedstock. So it has the characteristics of lightweight, which is only 1/16 weight of the brick and concrete structure.It can significantly reduce the vertical load of the building structure and reduces building weight and project cost.
(B)Insulation Resistance: As this new wall panel is core of EPS insulation materials, which insulation performance is extremely advantageous and meet the building energy efficiency design standards, and rank first among similar products.
(C) Permeability Resistance: The bibulous rate of this new wall panel is only 3.3%,which has reached the international advanced level in the same industry.
(D) Fireproof performance: this kind of wall panel is non-burning, and according to the testing, it is reasonable fireproof materials, for the 90mm thickness wall panel, the fireproof performance can be more 3 hours.
(E) Soundproofing: As new wall panel is using EPS as core, it has good sound insulation and air aspiration, which is more than 40 db sound insulation.
(6). With low business risk for establishing the EPS sandwich wall board machinery.
 
(A) long-term stability advantages: Due to the limit of functional requirements of the restrictions and sources of raw materials needed to be broad and rich , but also by limiting the requirements of the human environment, the wall construction material development developers is relatively difficult.Once this kind of wall material is successfully developed and is recognized by the government and society,its competitive advantage will be relatively stable and long-term business in the market.
 
(B) Mechanization in production, so less workers but high output and stability.
(C) It is a comprehensive utilization of the industrial wastes project, and will get a great support from the Government.
Packaging & Shipping
Sea Worthy Package of Automatic Operation Vertical EPS Partion Wall Plate Making Machine
 
Our Services
 The three types of the cement wall board forming machine:
1: Horizontal type EPS wall board forming machine: high level of automatic operation,fewer workers required.
Horizontal Type
Overall dimensionsPowerOutput with different thickness/pieces per mold
60mm75mm90mm100mm120mm150mm
2750x2504x1359 mm3kw16pcs14pcs12pcs12pcs10pcs8pcs
 
 2: Automatic vertical type: automatic operation,high output,fewer workers required.
Automatic Vertical Type
Overall dimensionsPowerOutput with different thickness/pieces per mold
60mm75mm90mm100mm120mm150mm
3380x3200x2680 mm4kw40pcs36pcs32pcs30pcs26pcs22pcs
 
C: Manual vertical type partition wall board making machine: Manual operation,the highest output amount the three types, but requires more workers.
Manual Vertical Type
Overall dimensionsPowerOutput with different thickness/pieces per mold
60mm75mm90mm100mm120mm150mm
3600x1320x2800 mmno58pcs50pcs42pcs40pcs34pcs28pcs
 
Company Information
GUANGXI HONGFA HEAVY Machinery Co.,LTD is a leading name in Concrete EPS Wall Panel Making Machine, Cement sandwich wall panel production line,AAC Block Production Line, Concrete Batching Plant, Fully Automatic Concrete Block Making Machine, Concrete Tile Making Machine, Concrete Pipe Making Machine, Non-Vibration Hydraulic Brick Making Machine, Mining Machinery AndP VC Pallets, Etc.
 
The machinery production facility established in 1990 is known for its quality, durability and efficiency. Building material machinery is the core business of HONGFA HONGFA Group.
 
It has four production factories with imported equipment and a large Research and Development centre. The plant area is 110,000m2 employing 1500 including 40 engineers and 150 assistant engineers. The annual sale is approx. 100Million USD covering more than 76 countries such as the United States, Russia, Australia, Brazil, India, Vietnam, Thailand, Sudan, North Korea, Angola, Bangladesh, the Five Central Asian Countries, etc.
 
Hongfa machinery has many Honours and Recognitions to its credit like:
1. One of Top Ten Influential Brands in China for Brick & Tile Industry
2. AAA Grade Credit Enterprise.
3. Star Enterprise with China Patent
4. China National Enterpriseabiding Contract & Good Faith
5. Quality and Credibility of the Dual-protection Demonstration Unit
6. Advance Quality Management Unit
7. High and New Technology Enterprise
8. Famous Trademark of China
9. Consumer Satisfaction Unit
10.One of Top Ten Good Faith Units
11.Advanced Exporter in China
 
We have offices and representatives in many countries and contact details are given in the CONTACT US page.
We offer longest international warranty and local support in the industry that speaks for our quality.
We will be happy to serve you please email us with your query on contact information below.
 
We are Direct factory, NOT AGENT, so the quality and after-sale services is guaranteed.
 
How about the Guarantee and Installation of the machine?
We provide our clients 3 years guarantee to the main structure of our machines, other company is only one year;and we will send engineer to to clients' site to guide the installation of the machines.
 
 How about the commissioning of the machine and training to workers?
Yes, after finish the installation of the eps wall panel production line, our engineer will do the testing and commissioning, and make the most suitable ratio of the materials to make the panels, and train the workers how to operate and maintain the machines.
 
Welcome to contact us for more information:
website: gxhongfa.en.made-in-china.com
 
Contact person: Yuki Yang
 
Phone:+86 183 7881 3711
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours