This article was published more than 3 years ago

Q: I’m about to undertake a complex project. I’ve got an older brick home that’s over 100 years old. There are places where the mortar needs attention. The bigger issue is a room addition we’ve got planned. Believe it or not, we located a brick that’s almost a perfect match. How do we match the mortar, and more importantly how do we mix the mortar so it lasts as long as the original mortar? Most of the contractors we’ve talked to seem to be clueless. — Christine P., Indianapolis

A: If you’re like most people, you’ve looked at hundreds or thousands of brick buildings of all types and never given the slightest thought to the mortar holding everything together. That’s okay. I once was a brick-and-mortar grasshopper, too.

Fortunately, I cut my teeth building in Cincinnati, working on many older houses. I also had the very good fortune to meet brick expert Paul Collins, who was one of the smartest people I ever met when it comes to all things brick and mortar.

More Builder: Seriously, don’t try to wire your home if you don’t know how — even if it will save you tons of money

Paul was a belt-and-suspenders type of guy. He was at least 30 years older than me and had his own brick sales company. Paul was kind enough to spend lots of time with me early in my career, sharing information that had for years been passed down verbally. Sure, there was the Brick Industry Association, but Paul’s information was from down in the trenches where the warfare is fierce and knowledge is won one job at a time.

Finding matching brick for a century-old house is a serious stroke of luck. (When you do that, I recommend loading up on lottery tickets, too.)

Brick is made from clay, and clay is a natural material that has infinite color variability. The clay deposit the home’s original brick came from could have been exhausted decades ago. The kiln temperature for the new brick could have varied, meaning even if it were the same clay, the color of the finished brick could have come out different.

My advice to those who are building a new home of brick is to think about a future room addition and buy the brick for it at the same time you build. I know this sounds like a harebrained idea, but you’ll never regret doing it. Brick is easy to store, and it won’t deteriorate if you just put a cover on top of it.

Here’s what Paul taught me about mortar. The mortar of old, that used on just about every project in the 1800s and early 1900s here in the United States, was made with just hydrated lime and sand. Modern mortars tend to have a Portland-cement component and not so much hydrated lime.

Hydrated lime is an amazing material. As crazy as this sounds, it’s powdered limestone. You know how durable that is, right? Think of all the national monuments and government buildings made from blocks of limestone. When you add water to hydrated lime, it re-forms into limestone.

Just a month ago I was in Puerto Rico and had the good fortune to visit a large church that was being restored. I talked with the masonry foreman for a short time, asking him about what they were using for both the brick and stucco restoration.

His answer was simple: “We just use hydrated lime. It can last for centuries, especially here in Puerto Rico where we don't get freezing weather.” He did say the stucco on the front of the church did have some white Portland cement added to it to make it more durable for people touching the walls.

Matching mortar takes lots of patience. It’s important to realize you need to match the sand in the old mortar when you’re repairing mortar or trying to match up mortar for a room addition.

More Builder: How to restore an old stone foundation

Not all sand is the same. Look very closely at a weathered mortar, and you’ll see that not only are the grains of sand different sizes, but they’re also often different colors. Remember: Sand is nothing more than very tiny pieces of rock. Sand is to ants what boulders are to us!

You need to visit several nearby gravel pits that sell sand to try to locate sand that matches what’s in your current mortar. This requires diligence, determination and discipline. It will be rewarded if you find the correct sand. Use a 10X magnifier to really get a feel for what your sand looks like before you go. If you have a smartphone that can take close-up photos, snap a shot of your mortar so you can see the colors and relative sizes of the grains of sand.

It would be very wise for you to take your time and do a small test panel before you install the brick on the room addition. Lay up a tiny brick wall that's maybe a foot tall by two feet long. Allow the mortar to cure. Remember that the sand particles are going to be covered with the lime paste so the mortar will dry with a uniform color and look nothing like your 100-year-old mortar.

This paste wore off your existing home’s mortar decades ago, which is why you can see the individual grains of sand now. After a month, do a very light acid wash on the test panel to dissolve the lime paste on the sand. You should be happy with the results if you invested the time to get the right sand.

Subscribe to Tim’s free newsletter and listen to his new podcasts. Go to: www.AsktheBuilder.com.